Micromount Sample Carrier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A carrier for 5 magnetic micro mounts. The lid snaps in place, if needed it can additionally be secured with zip-ties…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
A carrier for 5 magnetic micro mounts. The lid snaps in place, if needed it can additionally be secured with zip-ties or rubber bands. Very handy to transport or send samples to other labs.
There is enough tolerance to print this at higher speed / lower quality. The print in the foto was done with 0.2mm, 50mm/sec, 20% infill.
Make sure to rotate the lid for printing, so the top is facing down (sorry for that, I lost the design file).
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Doesn't Matter
Supports:
No
0.2mm
Category: Learning