1 / 6
Faucet / water tap spout — image 1
1 / 6

Faucet / water tap spout

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

no more air in the water but pressure!

Rating
5 / 5
Likes
36
Downloads
203
Makes
3
Views
1,761
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

It has been on my mind: all the fizz that comes out of the tap, could not you print something of your own without the braking air?

Answer: YES, you can!

I offer 2+ versions:

  1. one without holes, so you can experiment with fillin
  2. one with prefabricated holes that lead to the best result (out of about 5 variants)
  3. + an OpenSCAD(*) file, with which you can exactly create the outflow hole size, constriction and twist yourself.

In fact, I can only recommend one: WHahn_spout_0.9x0.stl.
“0.9x0” means: (from 1 to) 0.9 constriction, 0° twist. Twisting is nice but not centered for water flow, that becomes more of a "shower".

I must say that it is not everyone's cup of tea to deal with such water pressure! I often splash myself or around... but it's worth it: My WHahn_Ausguss_0.9x0.stl (i.e. 1 to 0.9 constriction, 0° twist) is great :)

*) sorry: this OpenSCAD file uses the additional library BOSL2, without it you won't get a result. AND, you need to rename you rename:

WHahn_Ausguss.json.txt  to: 
WHahn_Ausguss.json

in order to see the Presets in OpenSCAD:

here is a comparison between the Standard and the “WHahn_Ausguss_0.9x0”