Mount for HOTA D6 Pro LIPO battery charger to Bat-Safe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for HOTA D6 Pro LIPO battery charger to Bat-Safe
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 755
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This mount allows you to keep your HOTA D6 battery charger attached to your Bat-Safe securely. I fly RC planes and take the Bat-Safe full of batteries to the club field with me, and this makes it simple to carry and move around without dropping the charger or having charger wires get pulled out.
It slides onto the metal bracket/mount that comes with the Bat-Safe, but you will need to cut a hole for the electrical cord using a dremel or something (see picture). While the cord is plugged into the charger, the 3d printed mount and charger cannot come off of the metal bracket, even if upside down. I use really good double sided tape to make sure the bracket can't come off the Bat-Safe.
One possible downside to this mount is I don't know if the wireless charging capability of the charger works through the mount. I don't have anything to try it with. If it doesn't, you could probably modify the model to reduce the thickness of the top until it works.
Print settings I recommend:
- PETG or PLA
- 0.2 mm layer height
- 4 perimeters
- 15% gyroid infill (or more)
- Organic supports with 35 degree overhang threshold (on bed only)