1 / 3
Duckbill Paddle for Miniature Toggle Switches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slip-on paddle designed for most miniature toggle switches with 3mm diameter shafts
- Rating
- 5 / 5
- Likes
- 256
- Downloads
- 515
- Makes
- 2
- Views
- 3,410
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A simple ‘duckbill’ style paddle designed for most kinds of miniature toggle switch with a 3mm diameter, >10mm length.
Printing Guidelines
- Layer height: 0.1mm
Supports: No
Brim: No
Walls: 2+
Infill: Any
- Depending on your printer and filament, it will either be a snug friction fit or a slightly loose fit. If it's too loose, dab a small amount of glue in the hole before fitting the paddle (blu-tack also works as a removable solution)