1 / 5
Longer M-Lok Handguard for Mosquito V2 Airsoft Kit — image 1
1 / 5

Longer M-Lok Handguard for Mosquito V2 Airsoft Kit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An extrended M-Lok Handguard for Mosquito V2 Open Beta with 3 slots instead of two. This version is 200mm tall

Rating
5 / 5
Likes
53
Downloads
244
Makes
1
Views
1,978
Reviews
1

Updated at source:

Model information

Category
Other Sports
License
GNU General Public License v3.0

Update 2024-June-12: Added STEP files.

This is an M-Lok Handguard for the Mosquito V2 Open Beta with 3 slots instead of two. This version is 200mm tall and is heavily based on Miki's design. Stock/battery compartment shown is also a remix (not yet posted) of Miki's design. The Mock Suppressor in the photo is the medium version of Crazymind's design. The inner barrel is perfect for a 178mm inner barrel, I've used a 229mm in mine since that was the shortest available.

I've beefed up the design to be 1.25" or 3.175mm thick, which is the maximum thickness originally specified for polymer M-Lok handguards.

Needs an additional m3 hex nut and 6mm socket head screw, otherwise everything else is the same as the original. I have not touched the hopup design because Miki's version works very well in my experience.

Print the handguard vertically like in the screenshot, use supports only for the surface shown. Rail should be lying flat. 0.2mm layer height, 0.4mm line width (or whatever is your slicer defaults to for 0.4mm nozzles) reccommended. Brim recommended.

 

Update: Added a 2.4mm thick version (like Miki's original) since it proved durable enough when printed in PETG in my testing. This version should be a little lighter.

Tags