Prusa LCD Supports for Enclosure (Screw-Down)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I recently built an enclosure for my Prusa MK3 and wanted a way to secure the LCD to the outside of the enclosure. The…
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 1
- Views
- 218
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I recently built an enclosure for my Prusa MK3 and wanted a way to secure the LCD to the outside of the enclosure. The attached LCD supports will allow you to secure the LCD/controller with a screw.
Note that these are remixes of the parts from user pekcitron's wonderful Bear upgrade: https://www.thingiverse.com/thing:2808408
As always, Fusion 360 source is provided in case you would like to modify the design for a different screw size or some other purpose.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
20%
Filament:
Doesn't matter PETG Doesn't matter
Notes:
I used 3 perimeters, 5 top and bottom layers.
Category: 3D Printer Parts