Fake Prop Model Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simplistic fake prop camera. This is a 1h 13mins print and used 43g of filament on my AnkerMake M5C. Enjoy!
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 103
- Makes
- 3
- Views
- 493
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simplistic fake prop camera that prints with minimal supports. This took around 1 hour and 13 minutes to print and used around 43g of filament on my AnkerMake M5C.
Features:
- 2 hooks to attach a strap or string
- Fake lens
- Fake button
- Fake wheel
- Flash compartment
- Says “smile” where the brand should be :)
- Rounded corners so it is not painful to hold
Print Settings:
- File is already in correct orientation for printing.
- Supports (I used snug supports on AnkerMake slicer, which used 0.52g of filament on support material).
- Any infill (depending on how strong you need it).
Dimensions:
The whole camera is 100mm x 61.25mm x 48.5mm.
I designed this using TinkerCAD.
I have also posted this on Thingiverse.
Feel free to leave a comment if you have any questions and please post a make to let me know how you found it to print. I hope you enjoy this and, as always, Happy Printing!!