Luxorparts stealth presss mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanna have a way to remove and install my soldering iron and better fit so I made this
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I want a way to easier remove and install so I made this in Freecad. You may need to file small amount where screw goes at the overhang is.
Extra hardware: 2pc M3x5x4 inseart and 2pc M3x8 SHCS screw.
Installation: you want to screw it in enough so you can rotate soldering iron first because you want to make sure you are close to the middle as possible like these picture.
first picture is BAD need to be rotated. The second picture is GOOD.
The rotation part may different from model to model but I don't have another soldering iron to test it with.
When you are happy with the placement you want to tighten the 2 screw on lower side first then the rest and be cautious to not use way to much force because the insert is going to protrude out, (I accidentally did it once).
Any feedback would be appreciated!
Solder iron base on: https://www.kjell.com/se/produkter/el-verktyg/verktyg/lodning/lodkolvar/luxorparts-lodstation-pro-60-w-p40570