Skådis mount for Normcore 58mm Magnetic Dosing Funnel V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Ikea Skådis mount for the Normcore 58mm Magnetic Dosing Funnel V2.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A Ikea Skådis mount for the Normcore 58mm Magnetic Dosing Funnel V2.
Best way to print it is with the front side touching the built plate. Supports are required because of the mounting pins.
After printing you have to add a piece of wire into the intended grove on the back of the plate such that the dosing funnel can magnetically attach to it. The wire I used has a diameter of 1.15 mm but the grove should allow anything up until 1.5 mm (or maybe a bit less because of tolerances). I didn't glue the wire into place as it is pressed against the pegboard when installed.