1 / 3
1/2" Female to 1/4" Male NPT Adapter — image 1
1 / 3

1/2" Female to 1/4" Male NPT Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

When a compressor inlet kept clogging up I rustled up this adapter to mount a larger snubber to the inlet.

Rating
0 / 5
Likes
10
Downloads
196
Makes
0
Views
426
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

The laser cutter's compressor came with a 1/4 inch snubber as an inlet filter which once clogged with dirt would starve the compressor. After cleaning the snubber a few times I elected to buy a replacement and went for the cheapest I could find on amazon. When they sent me a 1/2 inch snubber despite clearly advertising 1/4 inch I thought to myself this is a much better solution, it'll take far longer to block! Only problem was fitting the two together on a reasonable budget. Without buying multiple adapters to take the 1/2 inch male NPT fitting down to 1/4 inch female NPT on the compressor nor spending loads for a metal fitting (it doesn't even need to be water/airtight) I elected to 3d model and print my own.

Designed in Fusion 360 using NPT plugs imported from McMaster - Carr catalogue.

 

Tags