QIDI X-Plus 3 Air Filter, changeable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use an Air Filter for Flashforge Adventurer 4 Series, 80x80x10mm for the QIDI x-Plus 3
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Things you need.
The 3D-Model
Sealing tape. (I had one lying around)
FAN_SPACER_v1.stl
https://www.thingiverse.com/thing:6237118
Thanks to D3adKenny
Air Filter for Flashforge Adventurer 4 Series, 80x80x10mm, e.g. Aliexpress
You can use the original screws.
Use the FAN_SPACER_v1.stl to fill the gap to the wall for the fan inside.
Maybe you must remove residues from the injection molding, I used a soldering iron. Very easy.
Measure the distance for the sealing tape on the back plane.
Filament: PLA
Infill: 15%
Layer: .24mm
Happy tinkering
Have fun! 😊