1 / 4
VKB Gladiator NXT 4080/4040 Profile mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple way to mount the Gladiator NXT to 4080 or 4040 profile rigs or table mounts
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 174
- Makes
- 1
- Views
- 1,444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple mount for the Gladiator NXT to attach it to 4080 or 4040 profiles as used in Simrigs or table mounts. It substitutes the original baseplate. If used in connection with my side covers this can reduce the width of the base to make it more suitable for a center mount.
I recommend using the following hardware:
4x M3x10 socket head screws
4x M6x12 socket head screws
4x M6 T-slot nuts
I recommend printing it lying flat on the bed with support only for the part meant to fit into the slot in the extrusion.