1 / 3
Stealthburner LGX Hartk PCB
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stealthburner with LGX extruder, Hartk PCB and without drag chain.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Only the extra compoments are included here. For the rest of the parts refer to original model or Stealthburner manual.
Part printing guidelines
- Standard voron requiremnets for printed parts
Required materiel
- 2x Zipties
- 1x M3 Hexnut
- 1x M3 10mm Male-Female Standoff
- 1x M3 5mm Male-Female Standoff
- 1x M3 washer
- 2x M3x6 Button head hex socket screws
- 2x M3x25 Socket head Cap Screws
- 1x Hartk PCB
Assembly Instructions
It is necesary to slightly modify Hartk PCB. Either to solder extruder motor wires directly to PCB or to solder extruder motor connector to the other side of PCB.