1 / 3
Kärcher FC5 head clip replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement clip for the Kärcher FC5 roller head.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a replacement clip for the Kärcher FC5 roller head. The original clips are quite weak and can break off. Just clean out the old clip with a sharp tool and superglue this in place.
Print these in the given orientation for best strength and use either 100% infill or 100 perimeters. Also due to the superglue being load-bearing I also recommend letting the glue dry for 24 hours.
If you want to apply superglue without making a mess of it then check out my Superglue squeezer.