1 / 2
Needle Minder (uses 3×6mm magnets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cross-stitch needle minder. Uses 2 3×6mm magnets.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 70
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Consists of 2 pieces. The bottom contains a recess for the magnet. The top contains the same recess, plus a 2mm wide groove for needles.
Both pieces have chamfered edges to prevent snagging on the fabric.
The magnets should just press-fit. If they feel too loose, a drop of superglue should help.
Printing
You should be able to print these face up or face down without support material. Bridging is minimal either way.