Curtain rod bracket for cab - Winnebago Revel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket attaches to the shelf above the cab in the Winnebago Revel. It makes use of the bolts on the shelf bracket
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a rattle free curtain rod and holder for my Winnebago Revel where I didn't need to drill holes. I have a 20/21 Revel.
There are 2 brackets which hold up the shelf above the cab. I designed the curtain rod holder to use these bolts.
I used a 14mm carbon fiber tube for the main rod. I could only find 3 foot sections (1000mm), so I had to glue 2 together using a 12mm tube as a joint.
https://www.amazon.com/gp/product/B07Q5HN9DG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09X2XNLF1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I used 12mm tubes for extensions, to fill the gap between the curtain rod holder and the side of the van.
The carbon fiber is a little pricy, but I wanted it to be strong and look good. I expect wooden dowels would work well too.
In it's current state, this is very functional, but there is certainly room for improvement.
Print on it's side so the holes for the rod are perfectly circular, and use supports to keep the bolt holes stable. I printed this at 95% using carbon fiber PETG.