Airsoft Scope Mount - Begadi "Competition"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NON-AFFILIATE LINKS: Coustom scope riser for the Begadi "Competition"…
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 150
- Makes
- 0
- Views
- 1,387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NON-AFFILIATE LINKS:
Coustom scope riser for the Begadi "Competition" scope: https://www.begadi.com/zielhilfen/zielfernrohre/zielhilfen-zielfernrohre-begadi-competition-zielfernrohr-1-2-6-x-24-ir-30mm-mittelrohr-beleuchtet-inkl-killflash-montage-flipup-cover-schwarz.html
Top red dot: https://www.amazon.de/gp/product/B06W2PKXLT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Of course, other models also fit. This is supported by the customized washers. Please scale these for your scope.
Rubber bumpers have been used in the mounting clamps. Its a notch-integrated design.
Used m3 bolts that were laying around. All of them were cut to fit nicely.
M3 square nuts are embedded.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
100 %
Filament: Overture PLA Black
Notes:
Please print the "Mount" and the "Klemme_1" & "Klemme_2" upright to increase the strength. This might be difficult on your printer so make sure you are using a sufficient support density and organic support.
You can of course use materials other than PLA, but printing is quite difficult with all the embedded nuts and the upright orientation.Category: Sport & Outdoors