SCBA Tank(Scott Branded) Feet (45 Minutes Carbon Tank)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made the feet for my 45 minute Scott branded carbon SCBA tank so it won't roll around.
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 59
- Makes
- 0
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made the feet for my 45 minute carbon Scott branded SCBA tank so it won't roll around. Designed with slots on the side to have a strip of velcro to go around the tanks to secure it. There is enough space for thin double sided tape so the tank doesn't twist. This is version 1 and it might be a little too thick/overkill, might make a slimmer version so it prints faster. I printed with PLA and it seemed plenty strong with 4 layers all around but you can print with whatever.
Printed with my Prusa MK3S+ in 0.3 draft mode with 4 layers all around and 15% grid infill. Took just under 7 hours for one.
Only tested on Scott branded 45 minute carbon SCBA tank so no idea if it will fit others.