Golf Simulator Control BOX FOR GSPRO (SMALLER VERSION)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
STL For my small wired mini GSPRO Control Box.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 65
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Smaller Version of my Golf simulator control box for GSPRO. I do not have DIY parts for this one for sale as i sell the complete box for $69. Not a lot of meat left on the bones for me to sell a kit yet. but maybe one day. this can be printed on most printers. this is specifically designed to print on my exact set up down to the measurements to get only walls and no infill. so just might take some time on a different nozzle. I Print these on a Sovol SV04 IDEX Printer ill give you my set up and then explain how to print on a non dual head printer
left extruder: 6mm nozzle
Right Extruder: .4mm nozzle
words are printed on the right extruder make sure you have the words print first. main box is printed on the left larger nozzle.
layer height is .22, all other settings just make sure to print slow first layers and hot so you don't get layer lines.
For people printing on non Dual head printers. you can use standard .4mm Nozzle.
you will not need to download the words just the box and cover plate.
if printed at .22 mm layer height the word indentations are .44 mm into the box. print the first 2 layers. pause your printer, change filament color do desired word color, print another 2-4 layers (not as important now). pause the print again change back to original color and let the box finish printing. try and print hotter than you normally do both bed and hot end. I print at 227 nozzle and 67 bed temp. i print in PLA plus.
Full complete box available here as well