1 / 1
A cap for "Joker system" 25mm tubes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cap to close 25mm tube ends.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
"Joker system" is a simple and magnificent system for furnishing stores. It consists of steel round tube sections, connectors, clamps and joints.
This is a cap to close a 25mm round tube end used as a leg for a banner frame. I made it to fit a tube rather tight so it is hard to take it off by hands. I guess it can be X-Y scaled to increase inner diameter by 0.2mm for a loose fit.
Cap wall size (thickness) is 5mm which is enough to compensate the thickness of the L-joint.