1 / 2
Senseo knock trash
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another coffee knock box
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 48
- Makes
- 0
- Views
- 689
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Yet another coffee knock box.
Holds the senseo pad in an upside-down position so it can dry between uses.
Required hardware:
- Wooden rod of around 28mm diameter, at least 16cm long. The one I used is 18.5cm long.
Warning: Some water may accumulate at the bottom of the box. If you do not trust your printer to create water-tight containers, increase the wall thickness ;)