1 / 2
Scaley textured planter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A planter with some sort of fantasy studded leather armor pattern.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
The one pictured is printed in Prusament My Silverness PLA blend with 3 perimeters using a 0.4mm nozzle.
Print as watertight as you can. Make sure that the inner and outer surfaces of the planter touch at least on the bottom of the pot. I used staggered seams to hopefully make it more watertight, and also melted the seam properly shut on the inside with a soldering iron afterwards. Infill isn't probably needed except to help support the cup shaped bottom on the inside, I turned it off after the first cm or so.