BBQ CONDIMENT HOLDER

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE AS SOON AS YOU JOIN, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

UPDATE JUNE 2023: NEW SIDE SHELF ADDED FOR LARGER BOTTLES. (UP TO 64mm IN DIAMETER)

After many requests, here's another version of my BBQ condiment holder. The original version is a patreon file only, but i made this one for you guys, so have fun and enjoy summer!

Its a super easy print, no supports needed and because its a multipart project no need for a multicolor printer!!!

-Can be printed on any 220x220 (or bigger) printer.
-All parts already placed in the right orientation.
-Easy assembly.
-Useful and a nice table center piece for your bbqs.
-Color coded file names.
-No support needed.
-No multicolor printer needed.
-Included, step-by-step instructions with exploded views.
-All files are in the zip file. 

Storage for:
-Salt and pepper (Up to 52mm in diameter)
-Toothpicks holder  (Up to 52mm in diameter)
-2 large squeezable condiment bottles (up to 5.5cm in diameter or 6.4cm with the updated shelves)
-Napkins
-Extra storage at the bottom, behind the functional doors.

The only part needing a color change is the little meter face. (meter digits). You can do it on any conventional printer with a simple color change at the right layer. If you are not familiar with color change, send me a message and i will help you with pleasure!

HARDWARE: You will need (10x) M3x12mm screws. (M3x10mm screws also works) You can use an imperial equivalent, because the holes are self-threading.

SETTINGS:
Nothing special, but i recommend to use 4 walls (also called shells, perimeters) at least to have a strong print.

I recommend to do a dry fit check before gluing each part. It will help you figuring out each step of the assembly.

In any case, if you have a problem, send me a message.

Have fun, and enjoy your summer folks!

Keep printing!