Survivor Ball Drop Challenge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Survivor Ball Drop Challenge
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 45
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Summary
My take on the Ball Drop challenge from 41, Ghost Island, Philippines, and Micronesia. These are thick handles with very basic knurling.
The center piece was designed to accommodate a standard pinball (1-1/16" bearing, 26.9875mm).
The stands are 2mm shorter than their mating pieces to help prevent being grabbed by the handles.
Printing
Print 2 of each model, except the center piece and 100mm stand, for a complete set.
With a .6mm nozzle I find the 50mm version uses 660g of filament and takes around 17hrs 30min to print.
Versions
There are 2 versions uploaded, a thicker 50mm diameter versions and a thinner 40mm diameter.
OBJ and STEP files are included for both should anyone want to tinker or remix.