Replacement knob for Logitech Squeeze Radio
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: Logitech Squeezeradio knob_0.2mm_PLA_MINI_40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 40.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model to replace the large knob on a Logitech Squeeze Radio
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Public Domain
The rubber material used in the large knob on my Logitech Squeeze Radio was starting to deteriorate. Didn't fancy trying to find a replacement part on ebay so I decided to model my own using Tinkercad.
The stl is already oriented correctly for printing.
- Layer height: 0.2mm
- Infill: 20%
- Perimeters: 2
- Bottom layers: 4