HelloBaby Camera Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall hanger for HelloBaby camera. Attaches to wall with command strips, needs 1/4" bolt for the camera though.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 89
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to be able to attach to the wall with command strips, that way baby can't reach the power cord and it doesn't leave holes in the wall. Just slap a couple strips on the back of the hanger. I left a hole on the top of the hanger though in case you want to put a single screw for extra peace of mind.
Canted to 15deg so you can see down into the crib.
Needs a single ¼"-20 (coarse thread) bolt, I used ½" long because that's the shortest I could find. Same size/thread bolt as the included wall mount adapter but here the original bolt wouldn't work because you need a longer one. The model has a thin layer covering the bolt hole, this is a sacrificial layer so you can print without supports. Just use a screwdriver or bolt to break through it.
Included the f360 file so you can tinker if you'd like.
**UPDATE** While some of the HelloBaby cameras have screw holes on the bottom, apparently a new redesign has done away with the screw hole. Check you camera. Maybe some intrepid soul can do a remix for the cam without the screwhole.