1 / 4
Ferris Sweep Half Swept Slim Case with Travel Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of a case and box for the keyboard in the case. Sweep Half Swept split keyboard
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 880
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Case has indentations on the bottom for 8mm rubber feet, but would also work without them. Tried to make it as slim as I could, so the thickness of the plastic between the bottom of the contacts the bottom of the case is 0.5mm. Also has a cutout for the power switch (which arrived after I took these pictures)
Print Settings
- Infill: 15%
- Perimeters: 0
- Layer height: 0.2mm
- Supports: none
I used Onshape, so you can have access to the original design here https://cad.onshape.com/documents/ce523b442d3f81aa2a40e0bb/v/fe4eb2fbc9c7f0b986c2aab8/e/2916723de1d3310cb006c1d3