1 / 19
2-1/2" - 63mm / 64mm Magnetic Dust Collection Connectors / Fittings — image 1
1 / 19

2-1/2" - 63mm / 64mm Magnetic Dust Collection Connectors / Fittings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic dust collection fittings for hoses and tools based around a 2-1/2", 63-64mm hose and tool sizing.

Rating
5 / 5
Likes
54
Downloads
395
Makes
3
Views
1,750
Reviews
5

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Inspired by the Robert Bieber magnetic dust collection fittings which I use in my shop.   I needed something in the 2-½" variety and due the proximity of fittings on a couple tools using the original design was not viable so I created my own model for these fittings.  I tried some of the other ones out there but they did not have sufficient holding force for my application.   They utilize (12) 10x3mm magnets with 2 magnets being present in each hole/pocket.   The magnets are super-glued in place.    The magnets utilized actually measure 2.75mm in thickness so if you have a true 3mm magnet the hole depth may not be sufficient.  

There is a male and female variant of each type. 

Note:  I have not printed the 4" to 2-½" fittings yet, in theory they should print without support but I cannot confirm this.  

Magnets used:  https://www.amazon.com/dp/B0C697TTK4?ref=ppx_yo2ov_dt_b_product_details&th=1

These were not modeled in a traditional CAD or 3D modeling software package.   No native files can be provided but potentially I could provide an export in the format of DWG, DXF, IFC, STP, or SKP.

Tags