1 / 17
Print in place soft tape measure holder (Now with version for people with bad hands) — image 1
1 / 17

Print in place soft tape measure holder (Now with version for people with bad hands)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in place soft tape measure holder. Now with version for people with bad hands

Rating
0 / 5
Likes
9
Downloads
52
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Made to hold 19x150mm soft tape measure. Printed at 210°C and 60°C bed with pla. Tolerances are quite loose ~0.6mm so it isn't an issue to print without external perimeters first. I used 10%(5% is probably also fine) cubic infill and didn't use supports. There is a 2mm 45° chamfer under the octagon grip part so there is minimal overhang as the shape is a bit complex to print and I had some drooping without it. It has 4mm thick walls, 2mm thick bottom and 2mm thick part to keep the tape measure from coming out. I also made a winder for the holder but it doesn't function properly yet. I recommend ironing all top parts as they will become nice and smooth and that the tape winds/unwinds smoother. I had some trouble with the Creality hyper series pla as the middle part didn't turn freely but I switched to Patona pla and the action is much smoother.

 

 You can use the photos attached as reference on how to fit the tape in it. You should rotate the middle part until the groove and hole are aligned and then push the tape measure almost a full turn. Then turn the whole thing upside down and shake a bit to get the end of the tape out and push it in the groove so you can wind it in. You should NOT be able to wind the tape all the way in but I can't guarantee this as I had to make the tolerances looser. It will be really hard to get it out but some tweezers and pliers will do the job. The tape also shouldn't become free from the center if you don't pull it out until there is 1qt turn left in the center part.

 

I attached freecad, obj and gcode file if you want to modify the design, slice it or use my settings(made for Creality Ender 3 V3 KE 275mm/s). You should be able to modify the tolerances easily with freecad but at least for me I had to reload the file sometimes or it would say “recompute failed”

 

Edit:

Added a version for people with bad hands. Only included gcode and obj files as I forgot to save the freecad ones… Also does not take over 6 hours to print. I don't know why the slicer says so :D

Tags