1 / 5
Lid for Amicon Millipore scientific equipment — image 1
1 / 5

Lid for Amicon Millipore scientific equipment

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the lid of a shaker container for an Amicon Millipore. (I attach an example photo in the description).

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
147
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I created this lid for the center where I work. It had deteriorated by the pressure working. I took as a reference one in good condition.

  • I recommend printing at layer height 0.15 or lower, since the thread pitch must be very sharp even if it appears wide.
  • The best results have been printing with the thread face facing the bed, paying attention to not generating supports in the thread area and reducing the speed in the overhangs.
  • It is highly recommended to use ASA, ABS or similar since it will be a piece subject to stress. Likewise, if there is a risk of contact with chemicals, it would be interesting to consider some appropriate material.

I am attaching a gcode for Prusa MK4 for PLA printing as a test.

Tags