ThinkCentre WiFi antennas adapter for VGA or Serial Port
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PLA plate for supporting two WiFi antennas on Lenovo ThinkCentre models.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 1
- Views
- 315
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple PLA plate that can be used as a support for two antennas for internal WiFi (and Bluetooth) cards. The antenna bolts can be firmly screwed to the plate and the plate itself can be screwed to the case using the standard size of a VGA or Serial port (same size as the VGA on ThinkCentre).
Print Settings
Printer:
Anycubic Kobra
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Black Post-Printing
OTHER REQUIREMENTS
Use two M3 screws and two M3 bolts to secure the plate to the case.
ATTENTION!
The space on the plate is sufficient to connect standard wireless antennas with small base, maximum 8-9 mm. Broader base antennas are not supported.
How I Designed This
I designed this adapter starting from a Lenovo Thinkcentre m710q to which I added an M.2 wifi/bt dual band card, but then I realized that it had no space for the external antennas and the internal ones (which I tried anyway) had poor reception. So I thought there might be enough space in the serial hole to fit the two antenna bolts. I disassembled the serial port that I would not have used anyway (on the Thinckcentre it is very easy to remove, it is a modular piece) and I designed this solution that worked very well. It is natural that the plate can still be used on any type of serial/VGA port hole on any PC that may require it, as this size is standard.