Jigsaw nozzle storage blocks for M6-size 3D print nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Today I have some nozzles, next week I may have more. If you just print and add another jjigsaw piece you will always…
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 2
- Views
- 339
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Today I have some nozzles, next week I may have more. If you just print and add another jjigsaw piece you will always have exactly the right amount of nozzle storage...
Now updated with new variants. Blocks made from the older files will fit these new ones (see picture). The new ones have better text (now including 0.8mm) and come in two variants, with or without M6 threads. When printed at a .1 layer height with a .25mm nozzle the threads were still not quite good enough to easily screw the nozzle in and out with fingers alone, but the thread is worth having since the other version can drop all the nozzles on the floor if you are careless. If you have a M6 tap and you can clean up the printed thread that is definitely the version to use - smooth and convenient. Never squint at nozzles again.
There is also a pair of mount blocks (one tongue, one groove) so that if you want you can screw the block of nozzle holders to your printer cabinet or any other convenient surface; or hang it on a nail, or wear it on a string around your neck, or whatever...
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.10mm layer height
Infill:
15
Filament:
PolyMaker PETG Urban Gray
Notes:
Text up or down prints fine. I like the texture from the plate so I print with text down. Be warned the preview might look like 8 pictures of the same block if you have the text facing away from you.
Category: 3D Printer Accessories