Utensil drying rack/shelf (easy to clean)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An utensil drying rack designed for regular spoons, forks, and chopsticks. Designed to be easy to clean.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
There was an old utensil drying rack we used for more than 10 years and it finally broke down. Can't find it anywhere now, so I made it from scratch based on its design.
It's hard to print the whole thing in one go, so I'd implemented 12mm M3 screws. You'll need 16 of them to screw it tightly. Stainless screws are recommended since we're dealing with water.
Holes around the side to see utensils clearly; holes on elevated bottom to let water drip through; bigger rectangular hole around bottom corner for easy cleaning with toothbrush. If it gets real dirty, just disassemble and clean it that way.
Do note that depending on the materials you use, it may not be food safe.
Edit: someone asked for a more one-body variation.
What's needed:
M3-12mm x 16 (or at least 10)