Input Shaper Corner/Fillet Test
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.51 – €0.63 net (excluding VAT)
For file: Corner - Test Speed_0.4n_0.2mm_PLA_MINIIS_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 25.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Input Shaper in Fast preset cutting corners and suffer from under-extrusion? Use this to check.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 150
- Makes
- 5
- Views
- 578
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
The 3mf file has the seams distributed a little bit to check their impact.
My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok.
Just print it and see if yours look nice.
I added pauses to take pictures. Lots of pictures…