PMAG Storage Solution for Gun Safe Door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This unit is built to fit in the door of an AMSEC Safe, but it could easily be modified to fit in others.
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 160
- Makes
- 0
- Views
- 1,823
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a drop-in storage mount for 10 PMAGs to fit in the door of an AMSEC safe. The STL files can be modified for other dimensions or geometries. I printed these in PLA (with PLA support material at the interface for clean lines on the parts and with 4 walls and 50% Gyroid infill for strength) and used a double row of dovetail joints to join the parts. A line of E6000 glue and 24 hours to cure and you are good to go. I added a hole in the bottom for a #6 sheet metal screw for added support if you place fully-loaded PMAGs in it, although empties wouldn't need it.
I will potentially print this in a stronger filament if the PLA doesn't hold up over time, but so far, it works great.