1 / 12

A Multipurpose Tripod Stand

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A tripod stand holder for mobile phone Take photos from a fixed place

Updated at source: May 15, 2024

Model information

A tripod stand holder for soldering, mobile phone magnifier when soldering, or digital distance meter, holder for laser et cetera

or … maybe a way to document your work by attaching a mobile phone/camera and take pictures along the way…

28 mars added stop nuts with wings, see under Accessories

also added 3MF_SwitchPlates and STL_SwitchPlates, Manfrotto and Velbon

Note that the screw to the knob to the switchplates is M4 round head (as the other M4). Don't tighten too much … you will notice …

31 mars added JointConnectionFixed for fixed angle in 15 degrees step, see under Accessories (and see images below)

First of all

you need this hardware

4 screws and nuts M6 x 40 (hexagonal head for the screw)

3 screws and nuts M4 x 25 (round head for the screw and 19 mm should be enough)

For the soldering item/phone stand I've cut 1 cm of a silicone hose (diameter 12mm outer, 8 mm inner) for each hook ( a common beer-maker hose :-))