Coffee tamper 58mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.44 – €1.76 net (excluding VAT)
For file: coffee tamper.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.60 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For tamping ground coffee in the moka-type pot.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Tamper for compacting your ground coffee in the basket of moka-type or other coffee makers where this is something you want to do.
It prints at 58mm as that is a loose fit in my 6-cup coffee maker, should be easy to scale for other sizes. You want it a loose fit so it can't jam by getting it bit off square, but not too loose so the coffee can escape around the edge. My coffee maker the container is about 59.5mm.