1 / 10
Single Extruder - Dual Color - Burp the Derpy Frog — image 1
1 / 10

Single Extruder - Dual Color - Burp the Derpy Frog

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.78 – €2.17 net (excluding VAT)

For file: Burp the derpy Frog Bottom.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.97 excluding VAT (range midpoint).

Weight reported by the author
25 g
Print time reported by the author
1.96 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Slide together the two parts of this model to create a dual colored poison dart frog!

Rating
4.895 / 5
Likes
546
Downloads
1,830
Makes
45
Views
7,821
Reviews
38

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Attribution — Noncommercial — Share Alike

What colors will you choose?

Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. 

In the end I decided to try and model my own frog using sculptris. Not my usual cup of tea (I'm a mechanical engineer) but this way I could ensure enough base-surface and meaty legs in order to make the dissection possible!

I had to make some alterations to the frog by connecting the front legs to the body in the bottom part and add a small bridge in the top part for printability, but once printed the parts slide together to form the final frog!

You might want to clean up the stringing beforehand and repeatedly slide the pieces together bit by bit to smooth down the mating surfaces if the tolerances are too tight for your printer (0,3mm).

Warning: this is the most challenging print of all my Single Extruder - Dual Color designs with thin walls, steep overhangs, flexible base and tiny bed contact surface. My easiest design will be the Easter Eggs.

I have found that disabling arachne and thin walls in PrusaSlicer make the print come out better since there are some very thin walls due to the way the model was cut up. I have supplied two g-codes that should work on most standard printers.

Happy printing, and if you like my models you can follow me for more awesomeness!

Tags