Low-Poly Bunny Phone Holder

Bunny as a toy, phone holder, keyring

---

If you want to sell prints of this models you can buy a commercial license
https://cults3d.com/en/3d-model/gadget/bunny-phone-holder-commercial-license

You can also check my Easter Collection (mostly Easter Eggs)
https://www.printables.com/@C47_3d/collections/142541

and a Phone Collection (some more designs for holding your phone)
https://www.printables.com/@C47_3d/collections/793008

---

Number in file names is a space for a phone in mm - numbers are also marked on the model (on the bottom)
For phone thickness of 8-16mm
If you will need other sizes you can resize any model in your slicer (preferably the closer one)
Use the equasion:
<Needed space (in milimeters)> divided by multiplied by 100% =

May not be suitable with phone set vertically but it depends on phone size and it's weight - mine works fine
The smaller the gap between the print and a phone the better chance it will not fall
The gap is cut with 12dgr angle

KEYRING
Drop a Bunny model of your choice along with a keyring file to the slicer
Click 'yes' if asked to merge models or do it by yourself (right click menu after selecting both models in slicer)

Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot with a Bunny - Ignore model 'errors' and DO NOT try to 'fix' the model

PARTS
To print a Bunny in two parts (body + eyes) drop a Bunny in slicer then right click and add a negative volume, choose BunnyV11_PARTS_Eyes-Negative-volume file
Print eyes with a different color
When assembling use small pliers. Keep in mind that Eyes are longer on the bottom (where a first layer is) - assemble it this way
Eyes are symmetrical on X and Y axis, it doesn't matter wich will go left or right

MULTICOLOR
Drop a Bunny and all of multicolor files to the slicer
Click 'yes' if asked to merge models or do it by yourself (right click menu after selecting both models in slicer)
Then choose a color for each part
You can now clone this model to fill the bed with it

Multicolor models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot with a Bunny - Ignore model 'errors' and DO NOT try to 'fix' the model

Update 26 III 2024
Moved numbers (phone thickness) to the bottom of the model
Now they are bigger and models are little easier to print

Update 27 III 2024
Reshaped ears and a tail a little. Should print cleaner now

Update 01 IV 2024
Added 'mm' to file names with numbers to avoid rare confusions

Update 03 VI 2026
Version 1.1
Little more details on face
Some better angles
Thicker ears
Eyes as a printed part
Different keyring
Files for a multicolor print (tested in slicer)

Printing tips

Printed with 0.4mm nozzle
0.1-0.2mm layer height
2-3 walls
7-15% gyroid infil - may be printed without infill too but it's a little stronger and more heavy
NO supports needed