4.3inch Display mount for anycubic i3 mega
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
couldnt find any mount for my screen, so i made my own
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Display mount for an anycubic i3 mega
For this mount you dont need to modify your pinter housing, you only have remove your old Display.
Display i used: https://www.amazon.de/dp/B08CH24YYD?psc=1&ref=ppx_yo2ov_dt_b_product_details
You also need 4 M3x 10 screws and 4 M3 nuts
The cutout in the clamps is for the display cable.
The clamps print easy on a 45° angle
You will have to place foam between the clamps and the display, but i really liked the feeling
If you have any questions or ideas on how to improve something, write to me as this is my first upload of a 3d model