Soldering iron add-on for 'Adjustable PCB Holder Tool'
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.29 – €1.57 net (excluding VAT)
For file: leg_holder_pine_mount_0.4n_0.25mm_PETG_MINI_1h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.43 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Add-on for placing a soldering iron (Pinecil type) on the 'Adjustable PCB Holder Tool' by @squinn.
- Rating
- 4.667 / 5
- Likes
- 270
- Downloads
- 451
- Makes
- 3
- Views
- 5,031
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use.
Designed to use a 8mm M3 bolt and a heatset M3 threaded insert to tighten the ‘iron tray’ to the stand at a variable angle of your choice. Both parts can be printed without any need for support.