1 / 3
Large Glasses - Stand / Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of The Maburs Glasses Holder with added triangle cut out. Made to fit larger and irregular centered spectacles.
- Rating
- 3 / 5
- Likes
- 24
- Downloads
- 185
- Makes
- 1
- Views
- 545
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
While I appreciate the design of 'The Maburs' greatly, I've encountered an issue with many of my larger glasses that have the nose pads and bridges placed higher than the temples.
To address this, the remix introduces a triangle cutout.
- This allows the glasses' temples to sit lower than the nose pads and bridge, accommodating larger glasses.
- Alternatively, it can be inverted for glasses where the bridge is significantly higher than the temples.
Print advise:
In case your printer and filament combination has issues with mastering 50% overhangs like the triangle cut out introduces, rotate the model by 90° on the x-axis and sink it by 0.2mm to skip the first layer of the chamfer.