1 / 15
Artillery Sidewinder X1 Z-Brace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-Axis brace kit for the Artillery Sidewinder X1 by Evnovo Adds extreme rigidity to the chassis. Bolt-on kit, no mods!
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 109
- Makes
- 0
- Views
- 873
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Standard Digital File License
Adds extreme rigidity to the chassis. Bolt-on kit, no mods!
The front has clearance for a light kit.
The two stock M3 screws on the bottom are replaced with longer screws.
Hardware used:
- 19x580mm (¾" OD) aluminum rods (2)
- M4 sliding T-nuts, drop in (2)
- M4x8 hex cap screws (2)
- M4x16 hex cap screws (8)
- M4 nuts (8)
- M3x8 hex cap screws (2)
Very little support is required, only these areas are needed:
*NOTE YOU MUST POKE THROUGH FOUR SCREW HOLES ON THE LOWER BRACES HERE:
