Easter Bunny
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.32 – €0.39 net (excluding VAT)
For file: Easter Bunny PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 21 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple, delicate Easter Bunny with a stand
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 193
- Makes
- 2
- Views
- 820
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Delicate Easter Bunny figure with a stand/base.
I recommend use Marble PLA 0.15-0.2 layer height, 3 perimeters, 100% infill and ironing on top layer - for Figure, for stand - 0.2 layer height, 15% infill, 2 perimeters.
Scalable, but remember to stay with 3mm thickness of bunny to fit the stand.