Bar Keepers Friend Snap Lid
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.55 – €0.67 net (excluding VAT)
For file: Bar Keeper Friend Snap Lid_0.2mm_PLA_MK3S_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Snap lid for Bar Keepers Friend with the inner part holding the seal to close the holes.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 107
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really appreciate you if you can consider a coffee for me if you like the design!
-------
Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can accidentally fell.
You can hear the snap click sound when the lid fits with the can.
Print Settings
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Filament: PLA (Inland Translucent Blue)