Wyze Cam V3 Enclosure Mount Secure Lock Remix for V2 Cam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a quick remix of the original model to support the wider V2 Cam base.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I did a little tweaking of the STL to make this work with my old v2 cams in my Lack Enclosure. Not a lot of change here, just a little reshaping of the base for the older V2 style cameras, really. I also notched the bottom little more to make removal of the camera a little bit easier.
This prints well in PLA with a 0.4 nozzle, but really any material and settings should work. I printed mine with thick walls (4+ perimeters, typically) to make sure that there is no cracking when installing the camera.
I also had to thicken the partition between the big washer and the back of the camera. I'm not sure if this is just an effect of my printer settings, input shaping, or what, but I was not able to get the original model to print the partition without failing on one side or the other. So making this a little thicker ensured that there were enough perimeters to actually hold properly. I found that you don't really need the magnetic disc in there, since the sides hold the base of the camera more than adequately, but I left it in the model for others with a use case different than my own.
Enjoy!