1 / 3
(un)original Prusa Drybox Auto Rewinder Axle Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Re-oriented and thickened original axle to improve strength and printability.
- Rating
- 4.889 / 5
- Likes
- 80
- Downloads
- 482
- Makes
- 19
- Views
- 2,108
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa satin sheet.
- I printed mine out of Prusament PC-Blend with 0.15 mm layer height, 4 perimeters, and 0% infill. This yields a very strong part that will not break even when pulling a 1 kg spool out of the drybox.