1 / 2
Replacement siphon for sprouting container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A siphon of a sprouting container was lost so I modeled a replacement.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
A siphon of a sprouting container was lost so I modeled a replacement. The red one in the photo is an original.
All walls are 1 mm thick but due to the slope of the outer cone the thickness a slicer sees is larger. I recommend extrusion width of 0.6 mm even with a 0.4 mm nozzle.
If you want to change the dimensions, the FreeCAD source is there.