Sinking Chair Fix (Brace)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.57 – €8.03 net (excluding VAT)
For file: Chair Fix_0.4n_0.25mm_PETG_MK4IS_6h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.30 excluding VAT (range midpoint).
- Weight reported by the author
- 123 g
- Print time reported by the author
- 6.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Does your office chair slowly lower itself? Stop it with this.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 115
- Makes
- 1
- Views
- 394
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Simple clamp, adjust the height to the desired height of your chair and clamp around the base. Any number of bolts should fit through the holes, by default the holes are just over 8mm across.
Made this in PETG to fix the wife's chair. I used thicker layers (~.25) with 4 vert shells and hex infill for strength. Use whatever settings you like, but make it strong.
To print faster you should be able to increase the layer height comfortably, just be mindful that with thicker layers you might run into drooping layers in the screw holes, variable layer height can be helpful with that.