SSUPD Meshroom V2 Bracket for Additional 3.5" Drives
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replacement allows an extra 3.5" drive to be added to the SSUPD Meshroom V2
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
There are holes for 4 different locations to place 3.5" drives in different configurations of the SSUPD Meshroom V2. The two upper locations are not mentioned in the manual. One of these upper locations cannot easily be used due to a Motherboard bracket getting in the way of connecting a SATA cable to this upper 3.5" drive location. I designed a replacement bracket that creates room for a SATA cable to be easily connected.
I designed four versions. All four use M3 screws. Minimum length for both M3 screws is M3 x 4mm:
- Three-slot GPU position using M3 nuts
- Four-slot GPU position using M3 nuts
- Three-slot GPU position using M3 heatset inserts
- Four-slot GPU position using M3 heatset inserts
Print without supports.